The newly redesigned EBB-460V Electric Bed Bug Heater offers enhanced performance - delivering more air for a faster temperature rise in the treated space. 

Nearly 100 pounds lighter and 10 inches narrower than its predecessor, the EBB-460V produces 7000 watts at 2,400 cubic feet per minute (CFM) of heated air.  Also equipped with lockable, swivel casters, the updated unit allows applicators easier maneuverability through narrow doorways and landings.  Its digital thermostat is locked not to exceed 135ºF based on air intake for the controlled application of heat.

The EBB-460V is UL approved and listed as an insect control device and is specifically designed for the application of heat to control bed bugs.

The EBB-460V is standard in all 460V equipment packages.  In a typical treatment, these heaters are placed within the space and recirculate the heated air for maximum efficiency.

The 4-heater power distribution box is brought inside the space to distribute power to the heaters.  A single main power cable runs from the generator to the distribution box, splitting the power for up to (4) EBB-460V heaters.

Main power cables connect the generator to the distribution box, up to a distance of 800 ft. These 460V/50A 6/4 cables come in 50’ and 75’ lengths. 

A heater patch cable connects the power from the distribution box to each EBB-460V heater, up to a distance of 300 ft. per heater.  Available in 25', 50', and 75' lengths.

6/4 4 ft. whip makes the connection to a rental generator or your own 460V/3Ph power source.

Male and Female ends for main power plug replacement.

Male and Female ends for heater patch cable plug replacement.

The EBB-115V Electric Bed Bug Heater is standard in the EBB-115V equipment packages.  This heater is ideal for treatment of hotels, motels, dorms, and single room applications.  This unit can also be an excellent addition to enhance treatment times, using house power, in conjunction with the EBB-460V equipment packages. 

The EBB-115V requires (6)-15 amp circuits for maximum BTU output.  (Not all 6 circuits are needed to operate).

In a typical treatment, the heaters are placed within the space and recirculate the heated air for maximum efficiency.  These heaters are equipped with digital Watlow temperature controls locked not exceed 135ºF, based on air intake, for the controlled application of heat.

The 120 Volt 12/3 High Visibility Extension Cords are used as the main power cable to supply 120-volt power to the EBB-115V heater.  Available in 25’ and 50’ lengths. (Distance of 12/3 cord should not exceed 75’ per run).

The 230V Power Distribution Box can be used to tap into 230V power from an electric range or dryer to provide the (6) 15-amp circuits of 115V power required for the EBB-115V heater. 

These plugs allow you to tap into 230V house power from an electric dryer to power your EBB-115V heater.  Includes both old and new style.

These plugs allow you to tap into 230V house power from an electric range outlet to power your EBB-115V heater.  Includes both old and new style.

Expandable, Wireless Temperature Monitoring System – includes a Netbook installed with proprietary temperature
recording software, wireless signal devices for transmission up to 1,000 ft. and up to 100 wireless temperature sensors, all
housed in a heavy duty, water and impact resistant case.
The system’s data can be used to identify hot and cold spots in the treated area and regulate and control hot air distribution.
Data can be exported to ensure customers that overheating did not occur and verify that target temperatures were achieved.

Fluke Digital Handheld Infrared Thermometer – offers quick and reliable surface temperature readings in a comfortable
and easy to use handheld device. An extra bright laser aimed at a specific object accurately and instantly measures temperatures. This unit can be used to check specific
points of interest during the heat treatment.

These custom designed, high temperature fans provide high CFM with low amp draw and operate well in high temperatures. These fans are necessary to evenly distribute heated air throughout the space and target high infestation zones and contents like furniture and bedding. Available in 16” (2.6 amps, 3,294 CFM) and 20” (3.7 amps, 4,765 CFM) sizes.

Attachment is used to direct heat at target areas. This adapter accepts the 20” high temperature ducting. Includes (2) 24” tarp straps for attaching to fan housing.

Attaches to the 16” Multifan Adapter to accept all 20” high temperature ducting.

AirWalls can be used to isolate an area that will not be heated or partition off
areas that will be heated in a progression. The 6’ x 10’ AirWall works great in stairwells and hallways, while the 12’ x 10’ AirWall can isolate untreated areas like a kitchen, living room, family room, etc.

The AirWall requires a 16” Multifan, adapter, and 20” transition. Made
of fire-resistant materials. Both 6’ x 10’ and 12’ x 10’ AirWalls can be used
individually or zipped together to build false walls or isolate larger spaces.

For more information on the AirWall click here

Wall Edge Duct is designed to direct heat on high bed bug infestation zones through the holes in the duct aimed at wall edges, baseboards, and carpet tacks, etc. The Wall Edge Duct requires a 16” Multifan, adapter, and 20” transition. Made of fire-resistant materials.

Protect fire suppression systems (sprinklers) and heat sensors from hot air. Constructed of highly insultated foam, the sprinkler head covers easily attach to a ceiling or wall mounted sprinkler head with a pull cord.

Are used to block air infiltration from under door jams. (Cut to size, and replace foam pipe insulation as necessary.)

Is used to cover vents and window air conditioners to prevent cool air infiltration during a heat treatment. Insulation can also be used to isolate spaces and cover hard-to-heat cement, etc. Available in 48” x 25’ rolls.

used to properly gather and store extension cords and fan cords.

The CordGrip solves the problem of constantly tripping over messy, loose extension cords. The patented design allows a person to access exactly the amount of cord needed from the male or female end without untangling the entire cord.The CordGrip holds 150 foot of cord and can be hooked right to the heater handle as well as a belt, ladder, or hook to keep cords up off the floor.

High quality flashlight for inspection during the treatment process. The Stealthlite is a rugged, indestructible, water-resistant flashlight with a light beam that can cut through water, smoke, fog, and rain.

Physical removal of live bed bugs with a Pest Vac is highly encouraged during the initial heat up process between temperatures of 100-120ºF when bed bugs emerge from their hiding places.

The IPM Vacuum comes standard with a HEPA cartridge filter, 9-foot clear safe hose, 19-inch rubber flexible gooseneck, a crack and crevice tool, two 20-inch extension wands, a 25-foot power cord, and a shoulder strap. All accessories fit neatly in the compartment under the lid. Weighs 11 lbs and runs on 115V power.

Use poly tape to seal windows, vents, and gaps to protect the space from air infiltration. This high quality tape will not leave a glue residue after being heated.